This post continues the high-level description of the body shell repairs.
Reference the previous posts on the body shell repairs; door skin replacement and remaining body repairs – 1
…
My Jaguar MK2 Restoration
Tag: Repair panels
Remaining body repairs – 1
Posted on August 16, 2016landieman
Following the post detailing the replacement of the door skins, this post details some of the remaining body repairs.
…
Tagged with Body repairs, Repair panels
Blogroll
Recent Posts
March 26, 2022
June 12, 2021
March 16, 2021
Categories
- Body (6)
- Brakes (1)
- Electrical (1)
- Engine (3)
- Front suspension (1)
- Fuel system (2)
- Gearbox and overdrive (1)
- Heater (1)
- Instruments (2)
- Rear axle (3)
- Rear suspension (1)
- Steering (1)
- Test Fit (8)
- Test fit – final (1)
Tags
Anti-roll bar Ball joints Body repairs Bump stops Camber angle Carburettor Castor angle Coil springs Compact Type A overdrive Cross member Crown wheel and pinion Diagrams Doors Engine mounts Engine options FA2122 Fuel tank Fulcrum shaft Fuse panel Gasket Gear lever Lower wishbone Maintenance Oil filter Oil seal retainer Paint Panhard rod POR-15 Radiator Rear axle ratio Rear engine mount Rear hub Rear springs Repair panels Shims Solex Steering column wiring Surgery Suspension bush Tank sealer Torque arms Water pump Wiring Wiring diagram XJ6 3.4-litre
Recent Comments
- landieman on Smiths tachometer — Electronic upgrade
- Jesse on Smiths tachometer — Electronic upgrade
- landieman on Test fit prep — Front suspension
- Frédéric VAXMAN on Test fit prep — Front suspension
- landieman on Smiths tachometer — Electronic upgrade
Subscribe to Blog via Email
Archives
Search Landieman
Copyright © 2016-2023 My Jaguar MK2 Restoration | Powered by WordPress | Design by Iceable Themes