Reference previous post: Test fit prep — Engine and gearbox (1)
In preparation for the test fit, and before the replacement engine and gearbox went anywhere near the……
My Jaguar MK2 Restoration
Tag: PS Pump
Blogroll
Recent Posts
February 19, 2020
January 21, 2020
March 12, 2019
Categories
- Body (5)
- Electrical (2)
- Engine (3)
- Front suspension (1)
- Fuel system (2)
- Gearbox and overdrive (1)
- Heater (1)
- Information (3)
- Rear axle (3)
- Rear suspension (1)
- Steering (1)
- Test Fit (8)
- Test fit final preparation (1)
Tags
Anti-roll bar Ball joints Body repairs Books Bump stops Camber angle Carburettor Castor angle Coil springs Compact Type A overdrive Cross member Crown wheel and pinion Diagrams Doors Engine mounts Engine options FA2122 Fuel tank Fulcrum shaft Fuse panel Gasket Gear lever Maintenance Oil filter Oil seal retainer Paint Panhard rod POR-15 Radiator Rear axle ratio Rear engine mount Rear hub Rear springs Repair panels Shims Solex Steering column wiring Surgery Suspension bush Tank sealer Torque arms Water pump Wiring Wiring diagram XJ6 3.4-litre
Recent Comments
- landieman on Heater — Strip down and upgrade
- David Bradly on Heater — Strip down and upgrade
- landieman on Heater — Strip down and upgrade
- David Bradly on Heater — Strip down and upgrade
- landieman on Test fit prep — Front suspension
Subscribe to Blog via Email
Archives
Search Landieman
Copyright © 2016-2020 My Jaguar MK2 Restoration | Powered by WordPress | Design by Iceable Themes